A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-6073002.png)
Installing
-
Install rear side airbag crash sensor (side curtain airbag) - 1 - in reverse order of removal.
-
When connecting connector - 4 -, ensure this engages correctly with crash sensor - 1 -.
CAUTION: No one should be in vehicle when connecting battery.
-
Connect battery ground strap.
-
Follow measures after connecting battery.
NOTE: If the Airbag Malfunction Indicator Lamp (MIL) K75 shows a malfunction after assembly, DTC memory must be checked with Vehicle
Diagnostic, Testing and Information System VAS 5051 B, cleared and then rechecked.
Tightening torque
Tightening torque
Nm
Crash sensor on wheel lining
9
