A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Oil Pressure Sender: Service and Repair
Oil Pressure Switch
Removing
-
Bring lock carrier into service position.
-
Disconnect electrical connector - 2 - on Oil Pressure Switch (F1) - 1 -.
-
Remove Oil Pressure Switch (F1).
Installing
‹› Tightening Specification => [ Oil Filter Housing Assembly Overview ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Filter
Housing/Service and Repair/Oil Filter Housing Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace sealing ring.
‹› Secure all hose connections using hose clamps appropriate for the model type.
-
Install lock carrier with attachments