A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Alternator Pulley: Service and Repair
Ribbed Belt Pulley With Overrunning Clutch, Removing and Installing
Ribbed Belt Pulley With Overrunning Clutch, Removing And Installing
Special tools, testers and auxiliary items required
-
Multi-point adapter 3400
-
Torx T 50 socket
Removing
-
Remove generator:
-
3.2l FSI engines.
-
4.2l MPI engine
-
4.2l FSI engine.
-
5.2l FSI engine.
-
Press off protective cap from generator pulley.
-
Counterhold pulley using multi-tooth adapter 3400 and rotate generator shaft clockwise to loosen it.
Installing
Installation is performed in reverse order of removal, noting the following:
-
To tighten, rotate generator shaft clockwise.
-
Clip protective cap onto generator pulley.
Tightening torque
Ribbed belt pulley with freewheel to generator: 80 Nm