A6 Quattro Sedan V8-4.2L (BVJ) (2007)
-
Remove nut - arrow - at B+ wire.
-
Remove hood release cable at opening lever.
-
Disengage engine wiring harness - 4 - at E box left plenum chamber - 1 -.
-
Press cup seal - 2 - out of E box left plenum chamber and guide engine wiring harness out through opening.
-
Remove nuts - arrows - and pull E box left plenum chamber off upward.
-
Guide cable - 3 - for hood out of E box left plenum chamber.
Installing
Install in reverse order of removal, observing the following:
-
When attaching cover for E box left plenum chamber, make sure cover is engaged correctly in mounts and no electrical wires are jammed.
-
Connect battery. Required actions => [ ] See: Battery/Service and Repair/Battery.