A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-4747005.png)
-
Now using the laser beam - 3 - on the (VAS 6190), check if the laser beam contacts sensor lens.
‹› If the laser beam still meets the sensor lens at this step after adjusting the same individual toe values, the (VAS 6190) is aligned correctly
(positioned).
‹› If the laser beam does not meet the sensor lens, (VAS 6190) alignment must be performed again.
-
Connect Vehicle Diagnosis, Testing and Information System (VAS 5051/B).
-
Connect Diagnostic Cable (VAS 5051/5A) to Data Link Connector (DLC).
