A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-5111002.png)
^
Note installation position on steering gear
13 - Banjo fitting, 47 Nm
14 - Seal
^
Always replace
15 - Seal
^
Always replace
16 - Seal
^
Always replace
17 - Seal
^
Always replace
18 - Banjo bolt with non-return valve, 35 Nm
19 - Bolt, 68 Nm
^
Observe tightening sequence
20 - Cylinder bolt, 22 Nm
21 - Tie rod
22 - Tie rod end
23 - Bolt, 110 Nm
^
Observe tightening sequence
Installation position of lines on steering gear
Installation position of bulkhead boot gasket
-
Insert bulkhead boot - 1 - into bulkhead so that marking - arrow B - points vertically downward.
-
Insert gasket - 2 - into bulkhead boot - 1 - so that marking - arrow A - points vertically downward.
