A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Removing
-
Remove subframe with attachments.
-
Apply marking - arrow A - above groove - 1 - of bearing - 2 - on subframe.
-
Install tools at subframe as shown in illustration.
1. Spindle 3346/2
2. Thrust piece 3348/2. Insert in subframe with smooth side toward bearing.
3. Tube 3259
4. Washer T40032/2
-
Pull bearing out of subframe.
Installing
Installation is in reverse order of removal. Note: