A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-5264003.png)
-
Secure both wheel bearing housings with tensioning strap (T10038) as illustrated.
‹› To prevent the joints on the upper control arm from being damaged, support the wheel bearing housing.
-
Disconnect threaded connection from both guide control arms - 1 - and track control arms - 2 - on subframe side. Tie up guide control arm and
track control arm using wire - arrows -.
‹› In order not to overbend the joints of track control arm and guide control arm, they must be fastened to the body with a tie wire or something like
it.
-
Place engine/transmission jack (V.A.G 1383 A) with wooden block under subframe and press lightly against.
