A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Power Window Switch: Service and Repair
Window Regulator Switch (In RF Door) E107, Removing and Installing
Window Regulator Switch (in RF Door) E107, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical components.
-
Switch ignition off and remove ignition key.
-
Remove front door trim.
-
Carefully release catches - arrows - using a small screwdriver.
-
Pull Window Regulator Switch (in RF door) E107 - item 2 - downward out of switch mount.
-
Disconnect electrical harness connector - 1 -.
Installing
Installation is performed in reverse order of removal, noting the following:
-
Press Window Regulator Switch (in RF door) E107 into switch mount until catches engage.
-
Install front door trim