A6 Quattro Wagon V6-2.8L (AFC) (1995)
Removing and installing Bowden cable for temperature flap
-
Remove clip -A-.
-
Detach Bowden cable and remove.
Removing and installing heater-A/C controls (manual A/C only)
-
Remove heater-A/C control knob.
-
Remove trim plate.
-
Remove center console.
-
Remove 4 screws -A- and remove heater-A/C controls.
Note:
Replace Bowden cables if they are sticking or binding.
Removing Bowden cables at heater-A/C controls (manual A/C only)
-
Unlock retaining clip (lower arrow).
-
Pull cable upward from retainer (upper arrow).
Installing Bowden cables at heater-A/C controls (manual A/C only)
A - To center flap (for footwell/defroster and instrument panel air outlets)
B - To temperature flap