A6 Quattro Wagon V6-2.8L (AFC) (1995)
Engine Control Module: Service and Repair
Removing
-
Switch ignition OFF.
CAUTION!:
BEFORE disconnecting the ECM harness connector, switch the ignition OFF and WAIT at least 30 seconds. Failure to do so may damage the
ECM.
Trim Panel Removal
-
Remove cover from lower right A-pillar.
-
Pull back carpeting in right front foot well.
Panel Screw Locations
-
Remove screws (arrows) from electronics box cover.
-
Carefully pull upper and lower cover out of electronics box.
-
Disconnect ECM from electronics box.
Brace
-
Carefully remove brace -3- along with attached parts.