A6 Quattro Wagon V6-2.8L (AFC) (1995)
/Page-2687006.png)
13. Loosen clamping lever and turn upper spring plate and/or strut adapter until pointer points to 6 ± 2° on degree scale of spring compressor.
-
L - Position of pointer for left. strut (counterclockwise)
-
R - Position of pointer for right strut (clockwise)
14. Tighten clamping lever (arrow).
15. Tighten nut on shock absorber shaft to: 50 Nm (37 ft. lbs.)
16. Release tension on coil spring carefully, make sure coil spring, damping ring and upper spring are correctly seated.
-
As soon as spring compressor is free, stop and remove spring compressor from coil spring.
17. Unscrew stop device lever arm and remove.
18. Remove strut from spring compressor VAG 1752 or equivalent.
