A6 Quattro Wagon V6-3.0L (AVK) (2002)
Parking Assist Distance Sensor: Service and Repair
Sensor For Parking Assistance (Front), Removing and Installing
Sensor For Parking Assistance (Front), Removing and Installing
Removing
Installation location: In bumper (arrows).
-
Remove respective wheelhousing liner on outside to remove sensors.
-
Open hood to remove inner sensors.
-
Disconnect harness connector -1- at sensor.
-
Press both catches to side (arrows) and press sensor through from outside toward inside.
-
Remove rear parking aid sensor toward the inside.
Installing
Installation is the reverse of removal.