A6 Quattro Wagon V6-3.0L (AVK) (2002)
Parking Assist Distance Sensor: Service and Repair
Sensor For Parking Assistance (Rear), Removing and Installing
Sensor For Parking Assistance (Rear), Removing and Installing
Removing
Installation location: In bumper (arrows).
-
The following sensors can be removed without removing the rear bumper:
-
All sensors for sedan and Avant with trailer hitch
-
Inner sensors for allroad
-
Remove rear bumper for removing all other sensors.
-
Disconnect harness connector -1- at sensor.
-
Push both lugs to side (arrows).
-
Press sensor from outside toward the inside.
NOTE: To do so, a second mechanic may be required to push the sensor which has been removed from locking mechanism to the inside.
-
Remove sensor toward the inside.
Installing
Installation is the reverse of removal.