A6 Quattro Wagon V6-3.0L (AVK) (2002)
Rear Door Panel: Service and Repair
Rear Door Trim, Removing and Installing
Rear Door Trim, Removing And Installing
1
-
Door trim
-
Remove screws - 2 - (2x) from door trim - 1 -.
-
Remove window regulator switch unit - 5 -.
-
Lift door trim about 20 cm upward and remove from door.
-
Detach Bowden cable for interior door handle Fig.1.
-
Disconnect electrical connectors Fig.2.
Clip locators - 3 - (6x) and - 4 - (1x) must be clipped in place when installing door trim.
When installing, press center of door trim onto door.