A6 Quattro Wagon V6-3.0L (AVK) (2002)
Roof Rack Frame: Service and Repair
Roof Molding, Removing and Installing
Roof molding, removing and installing
1
-
Roof molding
Removing:
-
Carefully lift off roof molding from back-to-front of vehicle.
Installing:
-
Attach seal -2- to roof molding.
-
Lubricate seal channel (i.e. with soap suds)
-
Insert roof molding below recess cover at front windshield -3-, and press into roof recess section by section up to center of roof.
-
Insert roof molding below recess cover at rear window, and press into roof recess completely.
2
-
Seal
-
Lubricate (i.e. with soap suds) before installing
3
-
Windshield