A6 Quattro Wagon V6-3.0L (AVK) (2002)
Brake Caliper: Service and Repair
Front Brake Caliper (FN-3), Servicing
Front brake caliper, servicing, (FN-3)
Notes:
^
Install complete repair kit when servicing.
^
Apply a thin coat of brake cylinder paste G 052 150 A2 to brake cylinders, pistons and seals.
1. Caps
-
Insert in mounting bushing
2. Guide pins, 25 Nm
3. Bleeder valve
-
Apply thin coat of brake cylinder paste G 052 150 A2 to threads before screwing in
4. Protective cap
-
Push onto bleeder valve
5. Brake caliper housing
6. Retaining spring
-
Insert with both ends in holes of brake caliper housing
7. Mounting bushing
-
Insert in brake caliper housing
8. Brake carrier
-
Bolt to brake caliper housing
9. Seal
10. Piston
-
Apply thin coat of brake cylinder paste G 052 150 A2 before installing
-
Piston diameter: 57 mm
11. Dust seal
-
Do not damage when installing piston
Front brake caliper piston, removing and installing