A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Using rotating plastic brush, remove remaining sealant from cylinder head and guide frame.
-
Clean sealing surfaces so they are free of oil and grease.
Installing
Note: Replace gaskets and O-rings.
Crankshaft aligned using T40026 locking pin.
-
Oil camshaft journal surface.
Left-side cylinder head:
-
Insert camshaft into cylinder head as depicted in illustration.
^
Cams at cylinder 5 point downward evenly (arrows).
Right-side cylinder head:
-
Insert camshaft into cylinder head as depicted in illustration.
^
Cams at cylinder 3 point upward evenly (arrows).