A6 Quattro Wagon V6-3.0L (AVK) (2002)
Crankshaft Seal Retainer: Service and Repair
Rear Sealing Flange, Removing and Installing
Rear sealing flange, removing and installing
Required equipment
^
Drill with plastic brush attachment
^
Protective glasses
^
Silicone sealant
Refer to Parts Supplier
Removing
Engine removed.
-
Remove flywheel or remove drive plate, Refer to Transmission and Drivetrain.
-
Remove oil pan (upper part), Refer to Oil Pan, Service and Repair.
-
Unbolt rear sealing flange (arrow).
-
Using rotating plastic brush, remove remaining sealant from rear sealing flange and at cylinder block.
WARNING: Wear protective glasses.
-
Clean sealing surfaces so they are free of oil and grease.
Installing