A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Remove bolts (arrows).
-
Remove air guide -1-.
-
Remove front engine cover (arrows).
Note: Before removing ribbed belt, mark direction of rotation with chalk or felt-tip marker. Reversing the direction of rotation of a run-in belt can
destroy the belt.
-
Swing ribbed belt tensioner in direction of arrow to release tension on ribbed belt using 3299 ribbed belt installation tool and 3299/1 claw for
tensioner.
-
Remove ribbed belt from pulley of power steering pump.
Installing
Installation is reverse of removal, noting the following:
-
First install ribbed belt on crankshaft pulley. Slide belt onto tensioning roller last.