A6 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-1546002.png)
Vehicles with automatic transmission
-
Remove bracket for ATF lines, to do so remove nuts -1- and -2-.
Note: Union nuts -3- of ATF lines must not be disconnected.
All:
-
Unbolt bracket for refrigerant line at oil pan (arrows).
Note: Depicted in illustration for a vehicle with manual transmission.
-
Disconnect electrical harness connector at Oil Level Thermal Sensor (arrow) and lay cable free.
-
Place engine oil drip tray beneath engine, since oil will escape again.
