A6 Quattro Wagon V6-3.0L (AVK) (2002)
Water Pump: Service and Repair
Coolant Pump, Removing and Installing
Coolant pump, removing and installing
Removing
-
Drain coolant.
-
Toothed belt, removing, Refer to Timing Belt, Service and Repair.
-
Remove camshaft gears from right cylinder head.
-
Unscrew bolts -1- and remove bracket with idler roller.
-
Unscrew bolts -2- and remove toothed belt guard at rear right.
-
Remove eccentric pulley for toothed belt.
-
Remove nuts -2- for toothed belt guard at left rear.
-
Remove bolts -1- for coolant pump and remove coolant pump.
Installing
Installation is reverse of removal, noting the following:
Note: Replace gaskets and O-rings.
-
Install toothed belt (adjust timing), Refer to Timing Belt, Service and Repair.
-
Top up coolant.