A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Disconnect exhaust system at left double clamp (left arrow).
-
Remove heat shield above exhaust system.
-
Remove heat shield for drive shaft (arrows).
-
Remove bolts at flange of transmission/drive shaft.
-
Push drive shaft to rear final drive together. The constant velocity joints can be adjusted axially.
-
Rest drive shaft on exhaust system.
-
Remove VAG1359/2 universal mount from VAG1383A engine/gearbox jack and place a piece of wood -1- onto punch instead.
-
Support transmission using VAG1383A engine/transmission lift.
NOTE: For automatic transmission 01 V, position engine/transmission lift directly behind the ATF pan. Insert a wood block to protect the transmission