A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Place container beneath connection -A- and carefully blow out coolant from heater core (using compressed air) via connection -B-.
-
Remove grommet -C-.
-
Remove refrigerant line See: Hose/Line HVAC/Service and Repair
-
Remove refrigerant lines and secure them (e.g. with cable tie) so they are not in the way during installation procedure.
-
Seal off refrigerant lines -B- and open connections -A- on evaporator.
-
Remove grommet -C-.
-
Remove storage compartment on driver's side, center console and instrument panel fascia. See: Body and Frame/Interior Moulding / Trim
-
Remove instrument panel cross member -A-.