A6 Quattro Wagon V6-3.0L (AVK) (2002)
NOTE:
The instrument panel cross member is fastened to the window cross member with an additional screw.
-
Disconnect all electrical harness connectors for wiring between body and air conditioner unit -B-.
NOTE:
Before disconnecting, mark the connectors for the wiring to the various positioning motors so that they do not become interchanged when
reconnecting.
-
Remove air conditioner unit -B-.
NOTE:
Starting September 1998, there was a running change in production from the version "1" air conditioner to the version "2" air conditioner.
From model year 2002 air conditioner version "3" are installed
Notes for installation:
-
Before installing, check all gaskets and seals on the air conditioner unit for damage and replace if necessary.
-
After assembling, all cable ties which were removed in order to take out the air conditioner must be reinstalled in their original positions.
-
Replace both O-rings for the refrigerant lines.
-
Make sure refrigerant lines are not under stress when installed.
-
Make sure that the condensation drainage duct and condensation drain valve are properly seated.