A6 Quattro Wagon V6-3.0L (AVK) (2002)
Headlamp Motor: Service and Repair
Headlight Beam Adjusting Motors, Removing and Installing
Removing
NOTE: Always adjust headlights after adjusting motors are removed and installed or are replaced.
-
Remove both bolts -1 - at air intake channel and then pull up at rear part of intake channel -2- (only for right headlight).
-
Remove housing cover from headlight housing.
Vehicles with manual and automatic static vertical headlight aim control
-
Disconnect harness connector -2-.
-
Disengage retaining tab-1-: At right headlight by turning clockwise; at left headlight by turning counterclockwise.
-
Pull ball head of adjustment axle out from ball head mount: At right headlight by pushing laterally to left; at left headlight by pushing laterally to
right.
Vehicle with automatic vertical headlight aim control