A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Disconnect vacuum line -1- at vacuum unit for cruise control.
-
Remove bolts -arrows- for bracket of vacuum unit -2- for cruise control.
-
Disconnect actuation rod at throttle valve control module.
-
Remove clip -3- for accelerator pedal cable sleeve.
-
Disconnect nipple -1- at accelerator pedal cable end from cable disk.
-
Remove accelerator pedal cable together with rubber bearing -4- from support -2-.
Vehicles with automatic transmission
-
Disconnect harness connector -2- at kickdown switch.
All:
-
Remove clip -1- at accelerator pedal cable support or kickdown switch.
NOTE: For vehicles equipped with a manual transmission, the clip is located behind the bulkhead.