A6 Quattro Wagon V6-3.0L (AVK) (2002)
Clutch Switch: Testing and Inspection
Clutch Pedal Switch Check -F36-, Checking
Special tools and equipment
-
VAG 1526A
-
VAG 1527B
-
VAG 1594A
-
VAG 1598/31
-
VAS5051 with VAS5051/1
NOTE: This signal is designed to prevent speed overshoots and jerkiness on switching from throttle open to throttle closed and vice versa when
disengaging clutch. It is needed for the cruise control system.
Test sequence
-
Connect testing and information system VAS5051 and select vehicle system "01 - Engine electronics". Ignition must be switched on. See:
Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Scan Tool Testing/Scan Tool Connecting and Initial
Checks/Connecting VAS 5051 Scan Tool
Display on VAS5051: