A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Select function "30" in button field -2- For "Adaptation channel 30" and press Q button to confirm input.
Display on VAS5051:
1
-
Channel 30 read and test
2
-
Tank sensor
3
-
Keypad - only direct input via the keypad is possible
4
-
The sliding bar is positioned on the current adaptation value, e.g. 128
NOTE:
-
"128" is the adaptation value For the standard resistance range For the fuel gauge sender as set by the factory.
-
The resistance value For the fuel gauge sender resistance range can be adjusted by = 8 Ohm to give an adaptation value between 120 and 136.
-
Only direct input via the keypad is possible!
-
If the value "128" was changed due to a customer complaint, the changed value must be transferred when replacing instrument cluster.
-
Change adaptation value via direct input See"B - Change adaptation value via direct input".
-
Enter 5-digit adaptation value. Insert zeros in front.
Example:
Desired input value: 132
Keypad input: 00132
-
Then observe impact on display.
Display on VAS5051 after performed adaptation: