A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Insert steel wire or pin (approx. 1.5 mm dia.) -1-, as illustrated up to stop while pulling lock cylinder with induction coil out of steering column
housing -2- in direction of arrow.
NOTE: Always observe specifications for replacing induction coil for anti-theft immobilizer if lock cylinder must be replaced.
Installing
Installation is reverse of removal, noting the following:
-
Insert spare key into lock cylinder and turn to position "ignition on".
-
Re-insert steel wire or pin -1- into the hole in front of lock up to stop.
-
Slide lock cylinder -2- with ignition key into steering column housing.
-
Then pull out wire and press in lock cylinder firmly until catch engages audibly.
-
Connect electrical harness connector at induction coil for anti-theft immobilizer.