A6 Quattro Wagon V6-3.0L (AVK) (2002)
^
Remove 3094 hose clamps.
^
Tighten hex-socket bolts for power steering pump belt pulley to 22 Nm.
^
First install ribbed belt onto crankshaft pulley and idler wheel. Push belt onto tensioning roller last.
Note: Note previously marked direction of rotation of belt and be sure that it is seated correctly on pulley.
Routing of ribbed belt:
^
D1 - without air conditioning
^
D2 - with air conditioning
^
Remove 3204 drift.
^
First install the electric fan and then the viscous fan.
Tightening torque for viscous fan
1331 Torque Wrench and 3312 Open-End Spanner37 Nm
Torque Wrench Without 3312 Open-End Spanner 70 Nm
^
Check fluid level.
^
Bleed steering system.
^
Check steering system for proper seal.