A6 Quattro Wagon V6-3.0L (AVK) (2002)
^
Place air-spring on rubber sealing ring and press downward.
Note: Air spring must not cant when pressing down
With sliding motion of piston, rubber sealing ring rolls up to the 3. offset on which the spring supports itself and seals.
Dimension between the center bore for air-spring/control arm bolts and the lower end of air-spring must be less than 262 mm before filling.
^
Check lateral movement of piston.
It must not be possible to twist air-spring strut.
^
Install mounting bracket
^
Install suspension strut