A6 Quattro Wagon V6-3.0L (AVK) (2002)
Suspension Strut / Shock Absorber: Service and Repair
Removing and Installing
Front suspension strut, removing and installing (Allroad)
Removing
^
Perform system venting of suspension strut
^
Deactivate level control
^
Remove wheels.
^
Secure brake disc using a wheel bolt.
^
Remove cover plenum chamber / battery
Note: Observe level control system I automatic vertical headlight aim control.
Note: In order not to damage joints of lower control arms, it is necessary to use VAG1383-A (engine and transmission lifter), for example, to
brace against too strong rebound.
^
Loosen connection of air hose at suspension strut only far enough, so that air escapes.
^
After pressure in suspension strut / air hose has completely escaped, remove air hose by loosening threaded connection at suspension strut.
^
Remove level sensor at track control link
Note installation position
^
Remove bolts -2-
Tightening torque: 45 Nm and then tighten another 55°