A6 Quattro Wagon V6-3.0L (AVK) (2002)
Wheel Bearing: Service and Repair
Wheel Bearing Housing Removed
Front wheel bearing, pressing out & in (Steel Wheel Bearing Housing Removed)
1. Wheel bearing housing
-
Note different suspension versions
-
Application
2. Wheel bearing
-
Installation position:
-
Larger inside diameter of wheel bearing faces wheel hub.
-
Pressing out 75 mm dia, Refer to Fig. 3
-
Pressing out 82 mm dia, Refer to Fig. 4
-
Pressing off bearing inner race, Refer to Fig. 5 Fig. 6
-
Pressing in 75 mm dia, Refer to Fig. 7
-
Pressing in 82 mm dia, Refer to Fig. 8
3. Wheel hub
-
Stepped design
-
Pressing out 75 mm dia, Refer to Fig. 1
-
Pressing out 82 mm dia, Refer to Fig. 2
-
Pressing in 75 mm dia, Refer to Fig. 9
-
Pressing in 82 mm dia, Refer to Fig. 10
-
Contact surface between rim/brake disc as well as brake disc/wheel hub must be free from rust, corrosion products and dirt.
-
Application
-
Lightweight construction hub; Refer to Wheel Hub