A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
ATF level changes with ATF temperature.
-
Performing ATF level check when ATF temperature is too high will cause excess filling.
-
Performing ATF level check when ATF temperature is too high will cause insufficient filling.
-
Excess filling and insufficient filling both affect the function of the transmission.
-
An extra ATF check must be performed for vehicles with auxiliary ATF cooler.
-
The ATF temperature is read out by the VAS5051 tester or VAG 1551 Scan Tool.
Checking ATF temperature
-
Connect VAS5051 tester to vehicle with VAS5051/1 diagnostic wire. Or, VAG1551 Scan Tool can be attached using VAG1 551/3 adapter.
-
Start engine.
-
When indicated on display:
-
Press buttons -0- and -8- to select "Read Measuring Value Block" and press -Q button to confirm input.
-
When indicated on display:
-
Press buttons -O-, -O- and -4- to select display group "004" and press -Q- button to confirm input.
-
When indicated on display:
-
Read ATF temperature in display field 1.
Checking and correcting ATF level