A6 Quattro Wagon V6-3.0L (AVK) (2002)
Fluid Line/Hose: Service and Repair
Inner Oil Line, Removing and Installing, A/T 01V
Inner oil, line, removing and installing
The following special tools and test equipment are required for this work
3381 Insertion tool
Notes:
^
Faulty O-rings at the inner oil line allow ATF to get into the differential, the differential is then overfilled and oil flows out at the breather.
^
Replace a removed oil line as a general rule.
^
It is essential to use the insertion tool 3381 for installing the oil line, otherwise there is a risk of leaks as a result of a bent oil line.
Removing
-
Remove valve body.
-
Use a screwdriver to pry inner oil line off transmission housing.
Installing
Installation is the reverse order of removal, noting the following:
-
Replace O-rings.
-
Insert oil line into 3381 insertion tool.