A6 Quattro Wagon V6-3.0L (AVK) (2002)
Fluid Pan: Service and Repair
Oil pan, oil strainer and valve body, removing and installing, 5 Speed Automatic 01V
CAUTION: Do not run the engine or tow the vehicle with the oil pan removed or without ATF.
Notes:
^
Always replace the valve body if contaminated or faulty.
^
Refer to the rules for cleanliness when working on the automatic transmission.
^
Apply a thin coat of petroleum jelly to O-rings and seals. Other greases cause operational problems in hydraulic components.
Removed components, overview
Note: A distinction is made between two types of transmissions.
^
Transmission with hydraulic control E17, on which the sensor for transmission RPM (inductive sensor) is secured to the underside of the valve
body.
^
Transmission with hydraulic control E18/2, on which the sensor for transmission RPM (hall sensor is secured behind the valve body on
transmission housing.
Overview of the removed parts for transmission with hydraulic control E17
Overview of the removed parts for transmission with hydraulic control E18/2
Oil pan, removing and installing
Special tools and equipment
^
VAG1306 drip tray
Removing
-
Remove noise insulation pane (arrows).
-
Place VAG1306 drip tray underneath transmission.