A6 Quattro Wagon V6-3.0L (AVK) (2002)
Note: The 3 clips -arrows- must engage visibly above the printed circuit board.
-
Place cover onto the guide of sliding cover and snap clips -arrows- in place.
-
Install handle for selector lever see Fig. 7.
-
Install center console and extension.
Fig. 6 Wiring for Shift Lock Solenoid Switch, selector lever illumination and Tiptronic, removing and installing
Removing
-
Remove center console and extension.
-
Disconnect connector -1- for Shift Lock Solenoid Switch -2- (not visible in illustration).
-
Unclip and lift out cover-3-.
-
Remove connector -4- for transmission range position and Tiptronic in direction of arrow.
-
Disconnect wiring at connector -5-.
Installing:
-
Install in reverse order of removal.