A6 Quattro Wagon V6-3.0L (AVK) (2002)
Fluid Pump: Customer Interest
A/T - Vehicle Won't Move In Any Gear
38 Vehicle will not move in any gear
38 09 01
2014155/3
June 15, 2009.
Supersedes Technical Service Bulletin Group 38 number 08-11 dated November 25, 2008 for reasons listed below.
Affected Vehicles
Condition
REVISION HISTORY
Vehicle will not move in any gear.
Technical Background
ATF pump border bushing may fail and cause a loss of oil pressure. The ATF pump is incorporated in the valve body. The pump is not a serviceable
part.
Production Solution
Improved ATF pump incorporated in the valve body from January 2004 vehicle production.
Service
It is not necessary to receive an authorization number from the Technical Assistance Center for the repair described in this bulletin.
Attach VAS scan tool printouts to the repair order. Warranty requested documents received without VAS scan tool printouts will be denied payment.
1. Run the engine at idle. Set the parking brake and place the transmission selector lever in drive (D). Do not press the brake pedal once drive is engaged.
Read and print MVB Group 15. If display field 3 reads 0 (zero) or the difference between MVB 15/3 (Actual pressure) and 15/4 (Nominal pressure) is
greater than 2 bar, proceed to line 3.
2. If the difference between MVB 15/3 and 15/4 is less than 2 bar, contact the Technical Assistance Center for repair authorization.