A6 Quattro Wagon V6-3.0L (AVK) (2002)
Seals and Gaskets: Service and Repair
Drive Pinion Double Seal, Replacing
5 Speed Automatic 01V
Double seal in drive pinion, replacing
Note:
-
On the left side of the intermediate flange there is an oil leak checking hole for the double seal in the drive pinion and the double seal in the
intermediate flange.
-
If fluid is leaking from this leak checking hole (arrows, the double seal must be replaced.
Tools required
-
3403 press tool
Removing
-
Remove differential.
-
Remove intermediate flange for front wheel drive.
-
Carefully remove drive pinion from shaft.
CAUTION: Do not install spur gears, which have been dropped on the floor. Replace the transmission if a spur gear is damaged.
-
Drive out double seal with suitable mandrel.
Installing
-
Install in reverse order. In addition, perform the following work steps: