A6 Quattro Wagon V6-3.2L (BKH) (2006)
Garage Door Opener Transmitter: Service and Repair
Instrument Cluster
Garage Door Opener Control Module J530, Removing And Installing
Removing
-
Remove front bumper cover.
-
Remove bolt - 3 - and remove retaining bracket - 4 -.
-
Remove Garage Door Opener Control Module - 2 - out of bumper cover.
-
Disconnect electrical harness connector - 1 -.
Installing
Installation is performed in reverse order of removal, noting the following:
-
Install front bumper cover.
Tightening torque
Garage Door Opener Control Module J530 to bumper cover: 2.5 Nm