A6 Quattro Wagon V6-3.2L (BKH) (2006)
Collision Avoidance System Switch: Service and Repair
Lane Change Assistance Button
Removing
-
Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.
-
Switch off ignition and remove ignition key.
-
Remove the center vents in the instrument panel.
-
Remove the Lane Change Assistance Button (E530) - 1 - from the trim with the air vent - 2 - - arrow -.
Installing
Install in reverse order of removal, observing the following:
-
Press the Lane Change Assistance Button (E530) into the switch housing.
-
Install the center vents in the instrument panel.