A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Pry trim - 2 - up approx. 20 cm out of door shell - 11 -.
-
Disconnect connector to treble speaker.
-
Disengage interior door mechanism release => [ Release, Disengaging ].
-
Disconnect connector on door control module => [ Disconnect connector on door control module ].
‹› Installing
To install, perform the steps used in removal in reverse order. When doing so, note the following:
-
Ensure spring nuts - 1 - (Qty. 4) and expanding nuts - 12 - (Qty. 4) are clipped in.
-
Ensure securing clips - 10 - (8x) are clipped into door trim. Replace damaged clips => [ Securing clip, removing door trim ].
-
On vehicles with anti-theft system and replace door trim: Cut opening along inner mark. Distance to outer mark approx. 4 mm.
CAUTION!
‹› Always install the bolt (N 090 179 4) (16 mm long).
-
Install the door trim using the bolts - 3, 5, 7 and 8 -.
3
Bolt
‹› Tightening specification 2 Nm
4
Treble speaker panel
5
Screws, (Qty. 2)
‹› Tightening specification 2 Nm
6
Trim panel
7
Bolt
‹› Tightening specification 2 Nm
CAUTION!
‹› Always install the bolt (N 090 179 4) (16 mm long).
8
Bolt
‹› Tightening specification 2 Nm
9
Armrest
10
Securing clips (8x)
11
Door shell
12
Expanding nuts (Qty. 4)
Release, Disengaging