A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Remove bolts - 3 - and - 4 -.
-
Open warning triangle cover - 1 - and remove screws - 2 -.
-
Carefully pull trim up from rear lid - arrows - by carefully loosening left and right trim spring clamps from rear lid.
-
Grasp between trim and rear lid and continue disengaging spring clamps.
-
Remove trim.
Installing
Installation is reverse of removal, but note the following:
NOTE: Replace damaged spring clamps.
-
Let lower rear lid trim engage in lid lock trim.
Tightening torque
Component
Nm
Lower rear lid trim
4