A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Remove right seat belt buckle with retainer.
Procedure for all vehicles
-
Push rear shelf - 1 - forward and unclip clamps - 8 - (4x) from rear shelf crossmember - 5 -.
-
Continue to push rear shelf forward - 1 - and disengage retainers - 4 - (3x) from keyhole-shaped opening in rear shelf crossmember - 5
-.
-
Pull rear shelf - 1 - with retainers with pins - 6 - (4x) out of carrier below rear window - 7 -.
Vehicles with fixed rear seat backrests
-
Unclip rear center belt guide from rear shelf - 1 -.
-
Guide belt webbing with rear center belt guide through opening - 3 - in rear shelf - 1 -.
Procedure for all vehicles
-
Remove rear shelf - 1 -.
-
Installing
-
Check clamps - 8 - (4x) for damage and deformity.
Replace damaged or deformed clamps.
-
Before installing rear shelf - 1 -, make sure clamps - 8 - (4x) are positioned correctly.
Vehicles with fixed rear seat backrests
-
Guide belt webbing with rear center belt guide through opening - 3 - in rear shelf - 1 -.
-
Clip rear center belt guide into rear shelf - 1 -.
Ensure belt webbing is not twisted.
Procedure for all vehicles
-
Engage retainers - 4 - (3x) in keyhole-shaped cutouts in rear shelf crossmember - 5 -.
-
Push rear shelf - 1 - back to stop.
-
Ensure retainer pins - 6 - (4x) are inserted in carrier openings below rear window - 7 -.
-
Clip rear shelf - 1 - onto crossmember - 5 - with clamps - 8 - (4x).
Vehicles with fixed rear seat backrests
-
Install right seat belt buckle with retainer.
Ensure belt webbing is not twisted.
-
Install rear seat backrest.
-
Install rear seat bench.
Vehicles with foldable rear seat backrests
-
Fold rear seat backrest back.
Procedure for all vehicles
-
Install D-pillar trim on left and right.
-
Install roof panel trim.
2
-
Child seat anchor, (3x)
-
USA and Canada only
-
Child seat anchor openings in rear shelf only on USA, Canada vehicles
3
-
Belt guide opening
-
Only on vehicles with fixed rear seat backrests
4
-
Retainers, (3x)
-
Joined firmly with rear shelf - 1 -
5
-
Rear shelf crossmember
6
-
Retainer with pins, (4x)
-
Joined firmly with rear shelf - 1 -
7
-
Rear window
8
-
Clamps, (4x)
-
Replace if damaged or deformed