A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Press protective cap onto brake caliper housing so that it contacts brake caliper housing - arrow - all around.
Use protective backings.
-
It should no longer be possible to remove protective cap from brake caliper housing by hand.
-
Thinly coat piston and seal with Assembly Paste before inserting.
-
Lift brake piston, as shown, with commercially available extension and ratchet adapter and lightly press against protective cap.
Do not angle piston, to avoid damaging seal sleeve.
-
Blow protective cap on with pressurized air (max. 3 bar). The protective cap will jump over brake piston.
Use protective backings
-
Press piston into brake caliper housing by hand.