A6 Quattro Wagon V6-3.2L (BKH) (2006)
‹› When removing, make sure that surface of cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with Assembly Paste (G 052 150 A2) before inserting.
-
Using Trim Removal Wedge (3409), insert the inner seal into the groove in the brake caliper.
-
Press in the protective cap using special tool - 1 - and - 2 -.
-
Item - 1 -Assembly Tool For Protective Caps (T10146/1)
-
Pos.- 2 -Piston Resetting Tool (T10145)
Use protective backings
-
Press the protective cap onto the brake caliper housing so that it contacts the brake caliper housing all around - arrow -.