A6 Quattro Wagon V6-3.2L (BKH) (2006)
Note:
^
Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed turning direction can cause damage to the belt
under operating conditions.
-
Pivot tensioning device in direction of - arrow - to relieve tension on ribbed belt.
-
Remove ribbed belt from coolant pump.
-
Release tensioner unit
CAUTION: Cover cap of expansion tank with rag and open carefully, as hot steam i.e. hot coolant may escape when opening.
-
Open cap of coolant expansion tank.
-
Loosen quick-release fasteners - 1 - and - 2 - and remove noise insulation.
-
Place drip tray for workshop crane VAS 6208 under engine.
-
Disconnect coolant hose - arrow - from oil cooler and drain coolant.