A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-2410006.png)
-
Coat new O-ring with coolant additive and install it in the coolant hose.
-
Press the coolant hose onto the radiator - 1 - until it engages audibly.
-
Press the coolant hose on again and pull to make sure the connection is engaged correctly.
-
Fill with coolant => [ Filling ] See: Service and Repair/Procedures.
‹› Complete coolant must be replaced if the radiator was replaced.
-
Check ATF level.
Tightening Specifications
