A6 Quattro Wagon V6-3.2L (BKH) (2006)
Drive Belt: Service and Repair
Ribbed Belt
Ribbed Belt
Removing
-
Pull front engine cover off - arrows -.
‹› Before removing the ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed turning direction can cause damage to the
belt under operating conditions.
-
Pivot tensioning device in direction of - arrow - to relieve tension on ribbed belt.
-
Remove ribbed belt and release tensioning device.
Installing
Installation is in reverse order of removal, note the following:
-
Place ribbed belt over belt pulley as shown in the illustration.